Adding Graphs To An Existing Canvas; Printing Graphs; Modifying Graphs - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

3. Select File > Save Current Canvas Configuration.
4. Enter a name and description for the configuration and click Save Canvas. A message displays,

Adding graphs to an existing canvas

The following procedure assumes that a canvas is already created.
To create a new canvas, you must first create graphs, as described in
monitor graphs"
save those graphs to a canvas, as described in
To add a graph to an existing canvas, perform the following steps.
1. Select File > Display Canvas Configurations.
2. Click a canvas in the list.
3. Click Edit.
4. Click Add.
5. Click a graph to add it to the canvas and click Save.

Printing graphs

You can print a single graph or all the graphs displayed on the selected canvas configuration. Only
one canvas configuration can be opened at a time.
To print a graph, perform the following steps.
1. Open the Performance Monitor window.
2. Create a basic or advanced Performance Monitor graph as described in
3. To print a single graph, right-click the graph and choose Print. To print all the graphs displayed
4. In the print dialog box, click OK.

Modifying graphs

To modify an existing graph that is saved in a canvas, perform the following steps.
Web Tools Administrator's Guide
53-1002756-01
The Save Canvas Configuration dialog box displays.
confirming that the configuration was successfully saved to the switch.
on page 94 and
The Canvas Configuration List displays. The error message "No Canvas configuration to
display" displays if there are no saved canvas configurations.
The Edit Canvas dialog box displays.
A list of graphs displays.
performance monitor graphs"
page 97.
on the selected canvas configuration, select File > Print All Graphs.

Adding graphs to an existing canvas

"Advanced performance monitoring graphs"
"Saving graphs to a canvas"
on page 94 and "Advanced performance monitoring graphs"
7
"Creating basic performance
on page 97, and then
on page 100.
"Creating basic
on
101