Enable Multi-Homed Support; Configuring Ip Address For Switch-To-Smiagent Communication In; Multi-Homed Systems; Configuring Ip Address For Smi Agent Client To Server Communication In Multi-Homed Systems - Brocade Communications Systems 53-1001778-01 User Manual

2

Enable multi-homed support

Enable multi-homed support

The Brocade SMI Agent supports multi-homed hosts; that is, hosts configured with multiple IPs.
This means that you can configure which IP address the SMI Agent should use for Event and ARR
registration on the switch.

Configuring IP address for switch-to-SMIAgent communication in

multi-homed systems

1. Edit the SMIAgentConfig.xml file found at .../server/jserver/bin with the following entry:
2. Restart the Brocade SMI Agent.
Configuring IP address for SMI Agent client to server communication in
multi-homed systems
1. Edit the jserver.properties file found at ...server/jserver/bin with the following entry:
2. Restart the Brocade SMI Agent.
12
<host address="xxx.xxx.xxx.xxx"/>
For example,
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE agent_config SYSTEM "SMIAgentConfig.dtd">
<agent_config>
<dbserver driver="" is_password_encrypted="" password="" url=""
username=""/>
<port_config arr="5400" eventing="123"/>
<secureport_config arr="876" eventing="1"/>
<host address="10.201.64.173"/>
</agent_config>
HostIPAddress=xxx.xxx.xxx.xxx
Brocade SMI Agent User's Guide
53-1001778-01