Displaying Flash Memory And Version Information - Brocade Communications Systems PowerConnect B-RX Release Note

Displaying flash memory and version information

Prior to upgrading the images on a BigIron RX Series switch, it is advisable to check the versions already
installed. This allows you to determine which versions need to be upgraded. It is also useful to check the
versions installed immediately after an upgrade has been done to make sure that you have installed the
versions required in your installation. The following sections describe how to use the show flash and
show version commands to display this information.
IronWare Software Release 02.7.02a for Brocade BigIron RX Series Swtches
Release Notes v 1.0 Page 12 of 46