Memory allocation
You can configure memory allocation for the client and server to improve performance. You can
trigger switch polling when a state changes or you can poll at intervals when no state change
occurs.
NOTE
SAN size is a consideration in selection of polling periods.
Configuring memory allocation settings
To configure memory allocation settings, complete the following steps.
1. Select Server > Options.
2. Select Memory Allocation in the Category list to set the memory allocation for the server and
FIGURE 44
3. Select the size of the SAN (small, medium, or large) you want to configure in the Current SAN
4. Click OK on the confirmation message.
DCFM Enterprise User Manual
53-1001775-01
The Options dialog box displays
client.
Options dialog box (Memory Allocation option)
Size is list.
Memory and asset polling values change to the new default values when you change the SAN
size. You may increase these values.
(Figure
44).
Memory allocation
3
97