Leakage Breaker; Relay Pcb - Canon imagerunner C5180 Service Manual

2) Remove the IH power-supply PCB [3].
- 4 connectors [1]
- 7 screws [2]
[2]
F-12-60

12.5.14 Leakage Breaker

12.5.14.1 Preparation for Removing the
Leakage Breaker
1) Remove the rear fan cover.(page
22)Reference[Removing the Rear Fan Cover]
2) Remove the rear lower cover.(page 12-
23)Reference[Removing the Rear Lower Cover]
3) Remove the IH power-supply unit.(page 12-
29)Reference[Removing the IH Power Supply
Unit]
4) Remove the DC power-supply unit.(page 12-
29)Reference[Removing the DC Power Supply
Unit]
12.5.14.2 Removing the Leakage Breaker
1) Remove the leak breaker unit [4].
- 1 clamp [1]
- 2 connectors [2]
- 3 screws [3]
[4]
[3]
F-12-61
[2]
[1] [3]
[3] [2]
[1] [2]
2) Remove the leak breaker [4].
- 2 screws [1]
- 1 clamp [2]
- 4 connectors [3]
[2]

12.5.15 Relay PCB

12.5.15.1 Preparation for Removing the
12-
Relay PCB
1) Remove the rear fan cover.(page
22)Reference[Removing the Rear Fan Cover]
2) Remove the rear lower cover.(page 12-
23)Reference[Removing the Rear Lower Cover]
3) Remove the IH power supply unit.(page 12-
29)Reference[Removing the IH Power Supply
Unit]
4) Remove the DC power-supply unit.(page 12-
29)Reference[Removing the DC Power Supply
Unit]
Chapter 12
[3] [1] [3]
[3] [1] [3]
F-12-62
[2]
[4]
12-
12-35