Cassette Size Sensor Relay Pcb - Canon imageRUNNER 2270 Service Manual

8.8.12.5 Removing the
Pickup Assembly 2
Refer to procedure 8.8.2
8.8.12.6 Removing the
Cassette
Solenoid
1) Disconnect the connector [1], and
remove the screw [2]; then, detach the
cassette pickup solenoid [3].
F-8-136
8.8.13 Cassette Size Sensor
Relay PCB
8.8.13.1 Removing the
Right Cover (rear)
Refer to procedure 8.8.1.1
8.8.13.2 Removing the
Right Door
Refer to procedure 8.8.1.2
0007-6662
Pickup
0007-6664
0007-6667
0007-7346
8.8.13.3 Removing the
Right Cover (lower
front)
Refer to procedure 8.8.1.3
8.8.13.4 Removing the
Pickup Assembly 1
Refer to procedure 8.8.1
8.8.13.5 Removing the
Pickup Assembly 2
Refer to procedure 8.8.2
8.8.13.6 Removing the
Cassette Size Sensor
Relay PCB
1) Remove the PCB cover [1] (snap-on).
F-8-137
2) Remove the cassette size sensor relay
PCB [2] (3 connectors [2], 2 clamps
[3]).
Chapter 8
0007-6669
0007-6670
0007-6671
0007-6672
8-95