Removing The Adf Reading Glass; After Replacing The Adf Reading Glass - Canon iR C2880 Series Service Manual

Chapter 5
820686679349
W-PLT-X
W-PLT-Y
F-5-36
B. Enter the value indicated by the bar code found at the upper left of the
copyboard glass (copyboard sheet) using the following service mode
item:
COPIER>ADJUST>CCD>BOOK-RG
(offset value against color displacement caused by copyboard glass)
B O O K - R G
F-5-37

5.4.1.3 Removing the ADF Reading Glass

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
1) Open the copyboard glass (or ADF) fully.
When opening/closing the copyboard cover, be careful not to get your hands
caught between the copyboard cover [1] and the rib [2].
It may cause injury.
5-20
W-PLT-Z
- 0 4
0014-1325
F-5-38
2) Detach the glass retainer (left) [2].
- 2 screws [1]
3) Remove the ADF reading glass [3].
F-5-39
When removing the ADF reading glass, take care not to touch the glass sur-
face.
The presence of dirt can cause white/black lines in the images. If dirt is
found, be sure to clean it using lint-free paper moistened with alcohol.

5.4.1.4 After Replacing the ADF Reading Glass

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
Enter the value indicated by the bar code found on the ADF reading glass us-
ing the following service mode item:
COPIER>ADJUST>CCD>DF-RG
(offset value against color displacement caused by stream reading glass)
[1]
[2]
0014-3114