[3]
[2]
4) Disconnect the connector [1], and remove the 2 screws [2]; then,
detach the scanner motor cooling fan [3].
[2]
[2]
When mounting the fan, be sure that the direction of air is as indicated
by the arrow.
11.5.30 Stream Reading Fan
11.5.30.1 Removing the Stream Reading Fan (FM4)
iR105i/iR105+ / iR9070
1) Remove the upper front cover unit.
2) Remove the 2 screws [1], and detach the stream read fan dust [2].
[2]
[1]
F-11-127
[3]
[1]
F-11-128
[2]
[1]
F-11-129
When mounting the fan, be sure that the direction of air current is as
indicated by the arrow.
3) Disconnect the connector [1], and remove the 2 screws [2]; then,
detach the stream read fan unit [3].
4) Remove the 2 screws [1], and detach the stream read fan [2].
11.5.31 Laser Cooling Fan
11.5.31.1 Removing the Laser Motor Cooling Fan (FM1)
iR105i/iR105+ / iR9070
1) Remove the inside upper cover.
0007-3032
2) Disconnect the connector [1], and remove the harness lock [2] from
the plate.
3) Remove the 4 screws [3], and detach the laser motor cooling fan [4].
11.5.31.2 Removing the Laser Cooling Fan 2 (FM5)
/ iR85+ / iR8070
[1]
[3]
[2]
F-11-130
[1]
F-11-131
[3]
[2]
[4]
F-11-132
Chapter 11
[2]
[1]
[2]
0007-3022
[1]
[3]
[3]
0008-8261
11-43