2.4.17 Position of the Side Paper Deck Pickup Roller Releasing Solenoid
Before removing the deck pickup roller releasing solenoid [1], be sure to take note of the
positions of the two fixing screws [2] of the solenoid with reference to the scale on the sup-
port plate. Or, mark the position for the solenoid itself on the support plate using a scriber.
If you are replacing the solenoid on its own, be sure to secure the solenoid exactly where
the old solenoid was found.
2.4.18 Attaching the Timing Belt for the Manual Feed Tray Assembly Side
Guide
Butt the rack plate [1] of the manual feed tray against A (open state).
Move the slide volume [2] in the direction of B, and attach the timing belt [3] to the pul-
ley [4].
COPYRIGHT© 2001 CANON INC.
[2]
F06-204-21
[3]
[1]
[4]
B
[2]
F06-204-22
2000 2000 2000 2000
CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 6 TROUBLESHOOTING
[1]
[4]
A
6-35