Removing The Original Pickup Roller/Original Separation Roller; Removing The Original Sensor/Registration Sensor - Canon SmartBase 1270D Service Manual

2.8.2.2 Removing the Original Pickup roller/Original Separation roller

1) Remove the separation roller unit. (See
2.8.2.1)
2) Free the 2 hooks [1], and detach the
original pickup roller [2].
3) Free the 2 hooks [3], and detach the
original separation roller [4].

2.8.2.3 Removing the Original Sensor/Registration Sensor

1) Remove the ADF motor unit. (See
2.8.1.3)
2) Free the 2 hooks [1], and detach the
original sensor [2].
3) Free the 2 hooks [3], and detach the reg-
istration sensor [4].
COPYRIGHT © 2002 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1210D/1230D/1270D REV. 1 MAR. 2002
CHAPTER 5 MECHANICAL SYSTEM
[2]
[1]
[3]
F05-208-16
[2]
F05-308-17
[1]
[3]
[4]
[1] [3]
[4]
5-59