Removing The Wirelss Lan Pcb (Wifi Model + Duplex Model); Removing The Paper Leading Edge Sensor Pcb (Duplex Model) - Canon i-SENSYS MF229dw Service Manual

4
Disassembly/Assembly > Controller System (Duplex Model) > Removing the Paper Leading Edge Sensor PCB (Duplex Model) > Preparation
Removing the Wirelss LAN PCB
(Wifi Model + Duplex Model)
■ Preparation
1) Remove the Left Cover (Duplex Model) (Refer to page 4-86).
■ Procedure
1) Remove the Wireless LAN PCB [1].
• 1 Flat Cable [2]
• 1 Screw (black TP) [3]
1x
1x
4 Disassembly/Assembly > Controller System (Duplex Model) > Removing the Paper Leading Edge Sensor PCB (Duplex Model) > Preparation
F-4-297
[1] [3]
[2]
F-4-298
Removing the Paper Leading Edge Sensor PCB
(Duplex Model)
■ Preparation
1) Remove the Left Cover (Duplex Model) (Refer to page 4-86).
2-1) Remove the DADF Unit + Reader Unit (DADF Model) (Refer to page 4-27).
2-2) Remove the SADF Unit + Reader Unit (SADF Model) (Refer to page 4-51).
2-3) Remove the Copyboard Cover + Reader Unit (Copyboard Model) (Refer to page 4-76).
3) Remove the Right Cover (Duplex Model) (Refer to page 4-87).
4) Remove the Front Cover Unit (Duplex Model) (Refer to page 4-89).
5) Remove the Upper Cover Unit (Duplex Model) (Refer to page 4-89).
6) Remove the Duplex Feed Guide Unit (Duplex Model) (Refer to page 4-91).
7) Remove the Main Controller PCB (Duplex Model) (Refer to page 4-95).
8) Remove the FAX NCU PCB (FAX Model 120/230V) (Duplex Model) (Refer to page 4-107).
9) Remove the Edge Left Cooling Fan (Duplex Model) (Refer to page 4-99).
4-108
F-4-299
4-108