Image Position Adjustment; Margin Along The Leading Edge; Left Image Margin; Leading Edge Non-Image Width - Canon imageRUNNER 2545 Series Service Manual

5
Adjustment > Image position adjustment > Leading Edge Non-Image Width

Image position adjustment

Copy 10 sheets from each pickup position to check that the image margin and non-image
area is within the standard.
• Each cassette
• Pickup tray
If it is not within the standard, go through the following procedures to adjust it.
CAUTION:
If changing the value of service mode item in this adjustment, enter the changed value
in the service label.

Margin Along the Leading Edge

Service mode> PRINT> PRINT NUMERIC> 053
1st side of copy: 2.5+/-1.5mm
0 2 4 6 8 10 12 14 16 18 20 5
5 Adjustment > Image position adjustment > Leading Edge Non-Image Width
Decrease the value.
(a decrease of '10' will
increase the margin by 1 mm)
Paper
leading edge
Increase the value.
(an increase of '10' will
increase the margin by 1 mm)
F-5-4

Left Image Margin

Service mode> PRINT> PRINT NUMERIC> 056
Decrease the value.
(a decrease of '10' will
decrease the margin
width by 1 mm)

Leading Edge Non-Image Width

Service mode> SCAN> READER> ADJUST> ADJ-XY> ADJ-X
Decrease the value.
(a decrease of '10' will decrease
the non-image width by 1 mm)
1st side of copy: 2.5+/-1.5mm
0 2 4 6 8 10 12 14 1618 20 5
Increase the value.
(an increase of '10' will
increase the non-image
width by 1 mm)
Image left edge
Increase the value.
(an increase of '10' will
increase the margin
width by 1 mm)
1st side of copy: 2.5+/-1.5mm
0
2
4
5
6
8
10
F-5-5
Image leading
edge
F-5-6
5-6
5-6