Unconfigure Configuration-Mode - Extreme Networks ExtremeWare Command Reference Manual

Configuration and Image Commands

unconfigure configuration-mode

unconfigure configuration-mode
Description
Removes the effect of the default startup configuration currently defined for the switch, resetting the
configuration mode to the standard configuration mode.
Syntax Description
This command has no arguments or variables.
Default
The standard mode is the default configuration mode.
Usage Guidelines
Use this command on "i" series switches to remove an enhanced mode configuration and reset the
configuration to the default standard configuration mode.
To configure the default startup configuration for the switch, use the
configure configuration-mode
command.
Example
The following command removes the effect of the default startup configuration currently defined for the
switch, resetting the configuration mode to the standard configuration mode:
unconfigure configuration-mode
History
This command was first available in ExtremeWare 7.3.0
Platform Availability
This command is available on all platforms.
1114 ExtremeWare 7.5 Command Reference Guide