Configure Rip Add Vlan - Extreme Networks ExtremeWare Command Reference Manual

IGP Commands

configure rip add vlan

configure rip add vlan [<vlan name> | all]
Description
Configures RIP on an IP interface.
Syntax Description
vlan name
all
Default
All. If no VLAN is specified, then all is assumed.
Usage Guidelines
When an IP interface is created, RIP configuration is disabled on the interface by default. When the RIP
interface is disabled, the parameters are not reset to default automatically.
Example
The following command configures RIP on the VLAN finance:
configure rip add finance
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
1316
Specifies a VLAN name.
Specifies all VLANs.
ExtremeWare Software 7.3.0 Command Reference Guide