Telephone Number - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
PRI Facilities
Console Display/Instructions
4. Enter the slot number in the control unit (ss = 1 to 17).
PRI Slot Number:
Enter slot number (1–17):
Backspace
Exit
5. Save your entry.
6. Specify the switch type.
Slot xx PRI Switch Type:
Select one
4ESS
5ESS
DMS-250
DMS-100
Exit
7. Save your entry.
8. Return to the System Programming menu.

Telephone Number

Use this procedure to assign a string of up to 12 digits to each PRI channel. This
string must match the number sent by the network (that is, the number provided
by the PRI service provider) to indicate the number dialed by an outside caller.
The system uses this number to route the call to the correct destination, which
means that the number assigned to each channel in the same B-channel group
must be unique. Note also that the number cannot be the same as the associated
test telephone number.
Additional Information
Dial or type:
Enter Slot number [ss].
Select Enter.
DEX600E
Legend-Ntwk
Legend-PBX
Press the button or function key next to
your selection.
Select Enter.
Select Exit twice.
3
Issue 1
April 1999
3-188
PC
Ã
Ã