Allowed List Assignments (#408) - Lucent Technologies PARTNER II Release 4.1 Programming And Use Instructions

Allowed List Assignments (#408)

Description
This System Programming procedure lets you assign up to four Allowed Phone
Number Lists to specified extensions.
Related Features
You must use Allowed Phone Number Lists (#407) to create the lists of
allowed telephone numbers before you use this procedure.
Valid Entries
1 = Assigned to extension
2 = Not Assigned to extension
Programming
To assign Allowed Phone Number Lists to an extension:
1. Press [
2. Enter the number of the extension to be programmed. For example, to
program extension 27, press [
appears:
Allow To 27
List Number:
3. Enter the list number (1–4). For example, to select list 1, press [
4. To assign or unassign the list, press [
displays.
5. At this point:
To assign or unassign another list to this extension, press [
[
Prev Item
To program another extension, press [
begin at Step 2.
6.
Select another procedure or exit programming mode.
5-8 Allowed List Assignments (#408)
] [ ] [ ] [
Feature 0 0 System Program
] until the list number shows on the display. Then repeat Step 4.
] [ ] [ ] [ ] [
System Program # 4
] [ ]. A display similar to the following
2 7
] until the appropriate value
Next Data
] [
Next Procedure
] [ ].
0 8
].
1
] or
Next Item
] and
Prev Procedure