Revising Allowed Lists - Lucent Technologies MERLIN LEGEND Release 6.1 System Manager's Manual

MERLIN LEGEND Communications System Release 6.1
System Manager's Guide 555-661-118
6 Managing the System

Revising Allowed Lists

The Extension Status feature must be set to the calling group or CMS mode
before you assign members to the group. For more information, see "Extension
Status" in the Feature Reference and in the "System Features" section of
Chapter 3, System Programming .
Changing calling group assignments may affect other features; for more
information, see the Feature Reference .
NOTE:
To assign an extension to a new calling group, you must remove it from its
old group before programming the new assignment.
Valid Entries
Extension numbers
Task List: Changing Calling Group Assignments
Obtain Form 7d, Group Calling.
If necessary, read "Group Calling" in the Feature Reference for detailed
information about this feature.
Plan changes using the planning guidelines above; record the new values
on Form 7d.
Open the System Programming menu from the MLX-20L telephone used
for system programming or from a PC with SPM.
Program the change(s), following the instructions for "Group Calling
Member Assignments" in the "Optional Group Features" section of System
Programming , Chapter 3, or the summary programming instructions below.
When you have finished, file Form 7d with the rest of the planning forms.
Programming Instructions
Console Procedure
PC Procedure
Revising Allowed Lists
An Allowed List provides some flexibility for extensions with calling restrictions by
allowing specified extensions to dial certain numbers (for example, 911),
regardless of the extension's calling restrictions. Use this procedure to modify an
Allowed List of telephone numbers that can be dialed.
More
calling group ext. no.
Type ext. no.
6
6
Dial ext. no.
Type calling group ext. no.
6
Issue 1
August 1998
Page 6-68
Dial