Retransmit-Interval - Dell PowerConnect J-EX4200-24T Software Manual

retransmit-interval

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
retransmit-interval seconds;
[edit logical-systems logical-system-name protocols ospf area area-id peer-interface
interface-name],
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id interface
interface-name],
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id virtual-link],
[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id virtual-link],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id interface
interface-name],
[edit protocols ospf area area-id peer-interface interface-name],
[edit protocols (ospf | ospf3) area area-id interface interface-name],
[edit protocols (ospf | ospf3) area area-id virtual-link],
[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id
interface interface-name],
[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id interface
interface-name],
[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id
virtual-link],
[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id interface interface-name]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Specify how long the routing device waits to receive a link-state acknowledgment packet
before retransmitting link-state advertisements to an interface's neighbors.
—Interval to wait.
seconds
Range: 1 through 65,535 seconds
Default: 5 seconds
NOTE: You must configure link-state advertisement (LSA) retransmit
intervals to be equal to or greater than 3 seconds to avoid triggering a
retransmit trap, because the Junos OS delays LSA acknowledgments by up
to 2 seconds.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring OSPF Timers
Chapter 73: Configuration Statements for Layer 3 Protocols
1683