Syntax
bw
bandwidth
bw — Interface bandwidth in Kbps (Range: 1–10000000).
•
Default Configuration
The default reference bandwidth is 10 Mbps
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the interface bandwidth to 500000 Kbps.
console(config-if-vlan1)#bandwidth 500000
capability opaque
Use the capability opaque command to enable Opaque Capability on the
router. Use the "no" form of this command to disable Opaque Capability.
Syntax
capability opaque
no capability opaque
Default Configuration
Opaque Capability is enabled by default.
Command Mode
Router Configuration mode.
User Guidelines
There are no user guidelines for this command.
1215
OSPF Commands