Sending A Fax By Immediate Transmission; Sending A Fax By Memory Transmission - Ricoh Fax 680 MP Operator's Manual

1
Make sure that the machine is in
standby mode and that the Memory
indicator is off (if it is on, press the
Memory key).
2
Set your document.
For information on printing page num-
bers, see page 98.
3
Dial the number in one of the following ways:
Quick Dial
Speed Dial
Ten Key Pad
Note: You can enter up to 40 digits for a fax number. If you enter
more, the number will be cleared when you enter the 41st digit.
If you are dialing from behind a PBX, insert a * character at the
beginning of your number, then a pause after the prefix.
4
Press the Start key.

SENDING A FAX BY MEMORY TRANSMISSION

1
Make sure that the machine is in
standby mode. If the display does not
look as shown, then press the Memory
key.
2
Set your document.
For information on printing page num-
bers, see page 98.
3
Choose whether to send the message
later or now: press Yes and go to step
"
, or press No and go to step
4
Enter start time and press Yes.

SENDING A FAX BY IMMEDIATE TRANSMISSION

SENDING A FAX BY IMMEDIATE
#
.
TRANSMISSION
5($'<   
',$/ .(<3$'
',$/ .(<3$'
 67$57
5($'<   
3$*(6  .3$'1
6(1' /$7(5" <1
7,0(   .(<<
21