Ip Bgp Policy Route-Map Match-Community - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip bgp policy route-map match-community

Configures a matching community primitive for the route map.
ip bgp policy route-map name sequence_number match-community [none | no-export | no-advertise |
no-export-subconfed | num:num]
Syntax Definitions
name
sequence_number
none
no-export
no-advertise
no-export-subconfed
num:num
Defaults
parameter
community_string
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
This command allows a matching community string primitive to be placed directly in the route map. By
default, no community string is specified. The default behavior can be reset by changing the value to
"none".
Examples
-> ip bgp policy route-map routemap1 1 match-community 400:1 500 700:1
Release History
Release 6.1; command was introduced.
page 25-134
The route map name.
The route map sequence number. The valid range is 1–255.
Removes the community match from the route-map.
Routes in this community are advertised within the AS but not beyond
the local AS.
Routes matching the community restricting advertisement to any peer.
Routes matching the community restricting advertisement to any exter-
nal BGP peer.
The community number, given in the form of the AS number and the
community number, separated by a colon, as defined in RFC 1997.
default
none
OmniSwitch CLI Reference Guide
BGP Commands
June 2012