Ip Bgp Policy Route-Map Prefix-List - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

BGP Commands

ip bgp policy route-map prefix-list

Assigns a prefix matching list to the route map.
ip bgp policy route-map name sequence_number prefix-list prefix_name
Syntax Definitions
name
sequence_number
prefix_name
Defaults
parameter
prefix_name
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
By default, no prefix list is assigned to the route map. The default behavior can be reset by changing
the value to "none".
•
The ip bgp policy
bgp policy prefix-list le
Examples
-> ip bgp policy route-map routemap1 1 prefix-list listC
Release History
Release 6.1; command was introduced.
OmniSwitch CLI Reference Guide
The route map name.
The route map sequence number. The valid range is 1–255.
The prefix list name or "none".
default
none
prefix-list, ip bgp policy prefix-list
commands are used to create and set permit/deny actions for a prefix path list.
June 2012
action, ip bgp policy prefix-list ge, and ip
page 25-145