Show Ip Bgp Neighbors Statistics - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

BGP Commands

show ip bgp neighbors statistics

Displays BGP peer message statistics.
show ip bgp neighbors statistics [ip_address]
Syntax Definitions
ip_address
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
This command displays message statistics for all peers associated with this speaker, or with a specific
peer.
Examples
-> show ip bgp neighbors statistics
Legends: RMSGS = number of received messages, SMSGS = number of sent messages
RUPDS = number of Update messages received,
SUPDS = number of Update messages sent,
RNOFY = number of Notify messages received,
SNOFY = number of Notify messages sent
RPFXS = number of prefixes received
UPTNS = number of UP transitions
DNTNS = number of DOWN transitions
Nbr address As
---------------+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----
192.40.4.29
192.40.4.121
output definitions
Nbr address
As
RMSGS
SMSGS
OmniSwitch CLI Reference Guide
A 32-bit IP address of the peer.
RMSGS SMSGS RUPDS SUPDS RNOFY SNOFY RPFXS UPTNS DNTNS
3 110 123 5
5 0 0 0
The IP address for this peer. This value is configured through the
bgp neighbor
The autonomous system to which this peer belongs. This value is con-
figured through the
Total number of messages (UPDATE, NOTIFY, OPEN, KEEPALIVE)
received by this peer.
Total number of messages (UPDATE, NOTIFY, OPEN, KEEPALIVE)
sent by this peer.
June 2012
0 0 1 8
0 0 0 0
command.
ip bgp neighbor remote-as
2 2
0 0
ip
command.
page 25-177