ip bgp policy route-map community-strip
Configures the value to strip from the community attribute of the routes matched by this route map
instance (sequence number).
ip bgp policy route-map name sequence_number community-strip community_list
Syntax Definitions
name
sequence_number
community_list
Defaults
No IP BGP policy route-map community list exists.
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
Configures the value to strip from the community attribute of the routes matched by this route map
instance (sequence number).
Examples
-> ip bgp policy route-map routemap1 1 commmunity_strip communitylist
Release History
Release 6.1; command was introduced.
Related Commands
ip bgp policy prefix6-list
MIB Objects
alaBgpRouteMapTable
alaBgpRouteMapCommunityStrip
page 25-148
The route map name.
The route map sequence number. The valid range is 1–255.
The community list name.
Configures an AS path matching regular expression primitive in the
route map.
OmniSwitch CLI Reference Guide
BGP Commands
June 2012