Ip Bgp Policy Route-Map Match-Mask - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip bgp policy route-map match-mask

Configures a matching mask primitive in the route map.
ip bgp policy route-map name sequence_number match-mask ip_address
Syntax Definitions
name
sequence_number
ip_address
Defaults
parameter
ip_address
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
This command allows a matching mask primitive to be placed directly in the route map. By default, no
mask primitive is specified. The default behavior can be reset by changing the value to "none".
•
The example on the next line shows usage combined with the
command.
Examples
-> ip bgp policy route-map routemap1 1 match-mask 255.255.0.0
-> ip bgp policy route-map routemap1 1 match-prefix 17.0.0.0 match-mask 255.255.0.0
Release History
Release 6.1; command was introduced.
Related Commands
ip bgp policy prefix6-list
ip bgp policy route-map match-
prefix
MIB Objects
alaBgpRouteMapTable
alaBgpRouteMapMatchMask
page 25-136
The route map name.
The route map sequence number. The valid range is 1–255.
The 32-bit IP address of the matching mask or "none".
default
0.0.0.0
Creates or deletes a policy route map.
Configures a matching prefix primitive in the route map.
ip bgp policy route-map match-prefix
OmniSwitch CLI Reference Guide
BGP Commands
June 2012