Xerox ColorQube 9303 Series Service Manual page 1312

Move the Carriages into the Docked Position
Do not move the upper and lower carriages into the docked position at the same time if the
marking unit is in the service position. The printheads can contact each other if the locator pins
do not stop against the frame.
1. Move the upper carriage into the docked position,
General Procedures/Information
GP 6
CAUTION
Figure 6.
Figure 6 How to dock the upper carriage
2. Move the lower carriage to the docked position,
February 2013
6-20
2
Rotate the upper carriage drive
gear counterclockwise to move
the upper carriage to the
docked position.
1
Move the gear selector to
the top of the slot to select
the upper gears.
Figure 7.
ColorQube® 9303 Family