REP 2.1.4: Cam Sensor
Parts List: 2.1
1. Perform the following:
a.
REP 1.1: WorkCentre Cover on page 4-3
b. REP 2.1.18: Printer Assembly on page 4-
24
2. Disconnect the cam sensor at connector J7 on
the printer interface PWB.
3. Remove the cam sensor by pulling it out of
its mounting slot (Figure 4-3).
Figure 4-3 Cam sensor
Xerox WorkCentre 450c/450cp Service Manual
Cam sensor
www.printcopy.info
Page 4-7