Rep 5.7 Feed Roll Assembly - Xerox DocuColor 1632 Service Manual

REP 5.7 Feed Roll Assembly

Parts List on PL 20.4
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Open Top Cover and remove Inner Cover (Figure 1).
a. Open Top Cover.
b. Loosen screws (2).
c. Remove Inner Cover.
Top
Cover
Screws
(2)
Figure 1 Removing Inner Cover
Repairs and Adjustments
REP 5.7
WARNING
Inner
Cover
2. Remove Feed Roll Assembly (Figure 2).
a. Remove clip.
b. Slide bearing.
c. Remove Feed Roll Assembly.
Figure 2 Removing Feed Roll Assembly
Replacement
NOTE: Feed Rolls rotate freely in direction of document movement.
NOTE: After replacing Feed Roll, reset HFSI counter. Enter
Screen (NVM 005-805).
NOTE: Feed Rolls and Nudger Rolls are replaced at same time.
6/02
4-24
Clip
Bearing
dC135 HFSI Counters Diag.
Prelaunch Training/Review
DC1632/2240