ABB IRB 6730 Product Manual page 524

5 Repair
5.9.2 Replacing the axis-2 gearbox
Continued
5
6
Continues on next page
524
Action
Guide the lower arm onto the guide pins
and check if the hole pattern between the
gearbox and the lower arm matches.
If the hole pattern does not match, use the
adjustment tool in the axis-2 gear and ro-
tate until a matching hole pattern is
achieved.
xx1300000819
Slide the arms into position on the guide
pins.
© Copyright 2023 ABB. All rights reserved.
Note
Adjustment tool for gear: 3HAC080331-001
xx2300000028
Product manual - IRB 6730
3HAC085699-001 Revision: B