ABB IRB 6730 Product Manual page 237

3
4
5
Product manual - IRB 6730
3HAC085699-001 Revision: B
5.4.2 Replacing spherical roller bearing, balancing device link ear
Action
Put the radial sealing on the Press tool J.
Note
Make sure that the sealing is turned accord-
ing to the figure.
Use a plastic mallet or similar on the Press
tool J and refit the radial sealing.
Apply some grease on the surface for the
bearing.
© Copyright 2023 ABB. All rights reserved.
Note
Press tool J included in tool set Dismantle
and mounting tool: 3HAC028920-001
xx2200001497
xx2200001498
Continues on next page
5 Repair
Continued
237