ABB IRB 6730 Product Manual page 473

6
7
Removing the protection ring in the frame
1
2
Product manual - IRB 6730
3HAC085699-001 Revision: B
Action
Apply rust preventive to the gearbox surface
shown in the figures.
Wipe clean the inner surfaces of the hole in
axis-1 gearbox.
Protection type Foundry Plus:
Apply rust preventive to the inner surface of
the hole, as shown in the figure.
Action
Foundry Plus
Cut the flange sealant at the protection ring.
Remove the protection ring.
© Copyright 2023 ABB. All rights reserved.
5.9.1 Replacing the axis-1 gearbox
Note
Rust preventive: 3HAC034903-001 (Mer-
casol 3110 Waxcoat. Recommended dry-
ing time is 24h.)
xx2200001418
Rust preventive: 3HAC034903-001 (Mer-
casol 3110 Waxcoat. Recommended dry-
ing time is 24h.)
xx2100001169
Note
xx2200001610
Continues on next page
5 Repair
Continued
473