ABB IRB 1010 Product Manual page 121

2
3
4
Removing the axis-3 motor
1
2
Product manual - IRB 1010
3HAC081964-001 Revision: B
Action
CAUTION
Loosening timing belts will release axes. This
means the axes can fall down.
Make sure axes are well supported before
loosening timing belts.
Loosen the screws and move the motor slightly
to slacken the timing belt.
Remove the timing belt from its groove on the
motor.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
CAUTION
Removing motors will release axes. This means
the axes can fall down.
Make sure axes are well supported before remov-
ing motors.
© Copyright 2022 ABB. All rights reserved.
5.3.1 Replacing the cable package
Note
xx2200000056
xx2200000057
Note
Continues on next page
5 Repair
Continued
121