Interface X2 (Serial Interface); Usb-Connection - Leibinger JET3 User Manual

Group 5

5.4.6 Interface X2 (Serial interface)

The interface "X2" is a serial data interface with a transfer rate up to 115200 Baud.
The access is suitable for a connection to the printer to application-specific software
for the data management and for the remote control of the printer.
Plug assignment:
The function allocations of the outputs is carried out by the software
of the JET3 in the menu Settings
You will find a circuit diagram of the interface in the appendix of this
manual!

5.4.7 USB-Connection

By the USB-connection you can connect all common USB-devices as e.g. mouse,
keyboard or USB-stick very simply. All data can be exchanged comfortable and
simply by the USB-connection. Software updates, exchange of variable printing data
or memory expansions can be carried out simply with the USB-stick.
Plug assignment:
Release R1.03e
Transport/Start up
Pin connection:
Pin Designation
1 NC
2 RxD
3 TxD
4 Connected with 6
5 GND
NC = not connected
Pin connection:
Pin
1
2
Pin Designation
6 Connected with 4
7 RTS
8 CTS
9 NC
I/O-Settings
Designation Pin
+V (+5V) 3
Data - 4
Page 40
Outputs.
Designation
Data +
GND
LEIBINGER JET3