Functional Area Counter Parameter 1; Number Of Digits (Counter Digits); Figure 137 - Print Elements (Counter Menu (Func. Area 1)) - Leibinger JET2NEO Manual

Page 226

8.6.3.1 Functional area Counter parameter 1

In the functional area <Counter page 1> you can define the following settings:
 Counter digits (Number of digits)
 Step width
 Repetitions
Figure 137
Print elements (Counter menu (Functional area "Counter page 1"))
2
3
4
5
1 – Register cards
2 – Display field <Counter digits>
3 – Display field <Step width>
4 – Display field <Repetition>
5 – Selection <Counter direction>

8.6.3.1.1 Number of digits (Counter digits)

The setting defines the number of digits of the counter. The maximum input is 10 digits.
The set value is shown on the accordant display field.
Release R1.12 en
Job editor
 Counter increment
 Counter direction
 Left-hand zeros on/off
8
6 – Control box <Left-hand zeros>
7 – Pop-up window <Counter increment>
8 – Button <OK ()>
9 – Button <Close>
Group 8
1
6
7
9
JET2 neo