Number Of Digits; Start Value; Initialization Value; Figure 169 Counter Settings - Initialization Value - Leibinger JET3 up Operating Manual

Group 8

8.7.3.1.1 Number of digits

The setting defines the number of digits of the counter. The maximum input is 10
digits. The set value is shown on the accordant display field.

8.7.3.1.2 Start value

The setting defines the start value of the counter. The maximum input is 10 digits.
After reaching the end value the counter will be reset to the start value.
The set value is displayed on the accordant display field.

8.7.3.1.3 Initialization value

The setting defines the initialization value of the counter. The maximum input is 10
digits.
That means if the job is started or loaded for the first time, it is first counted from
the initialization value to the end value. Afterwards it is then always counted from
the start value to the end value.
The set value is shown on the accordant display field.
Figure 169 Counter settings - Initialization value
Example:
JET3up
Job Editor
Start
value
Page 321
Initialization value
End
value
Release R1.06