Service Interval - Leibinger JET3 User Manual

Group 7
After finishing the storage the message (5), that the process has been carried
out is faded in. The saving happens with the description „datalog_LJ3-("serial
number of the printer").txt".
Finally confirm the message with the button <OK> (6).
Note: If no storage medium (memory device) is connected, the message (7) is
faded in. Confirm the message with the button <OK> (8). Connect a
memory device and repeat the complete process.

7.4.6 Service interval

With the option <Service Interval> (2) you can open the display window "Service"
(3). The following parameters are displayed in this window:
The date of the last inspection (4)
The total amount of operation hours of device (5)
Operation hours since the last inspection (6)
Figure 57
1 – Button <ServiceFunctions>
2 – Option <Service Interval>
3 – Display window <Service>
4 – Display <Date of inspection>
The button <OK> (7) closes the window.
Release R1.03e
Data/Programming
1
5
4
2
6 – Display <Total operation hours>
7 – Button <OK>
3
6
Service interval window
5 – Display<Operation hours since>
Page 109
7
LEIBINGER JET3