Service Interval; Figure 80 - Service Dialog Box - Leibinger JET3 up Operating Manual

Page 182

7.4.7 Service interval

The option <Service Interval> (2) opens the dialog box "Service" (3). The dialog
box shows the following parameters:
 The date of the last inspection (4)
 The total amount of operation hours (5)
 Operation hours since the last inspection (6)
 Total number of prints counter (7)
 Total number of drops counter (7). The accurancy of the drop counter is +/-
100 drops.
The button <OK> (8) closes the window.
Figure 80 Service interval dialog box
3
4
5
6
7
8
9
1 – Drop-down menu
<ServiceFunctions>
2 – Option <Service Interval>
3 – Dialog box <Service>
4 – <Date of last service>
5 – <Working hour meter>
Release R1.06
Job Editor
6 – <Working hours since last service>
7 – <Total print counter>
8 – <Total drop counte>
9 – <OK> Button
Group 8
1
2
JET3up