Definition Of User Rights; Lost Password; Password Protection (Password Query) - Leibinger JET2NEO Manual

Page 140

7.2.3.4.4 Definition of user rights

In the several functional areas of the menu you can enable or lock the functions of the
current access levels. An enabled function is displayed by a  in the control box.
The selection of a functional area happens by clicking on the accordant register card.
Note:
If a function is blocked in a specific level, it will be deactivated in the menus insofar
as it is technically possible.
If this is not possible, a safety message <Access authorisation> (see picture
„Password level display and safety messages") is faded in by calling up a function for
which the active level has no access authorisation.

7.2.3.4.5 Lost password

If the password of the highest defined access right (Supervisor) has been lost special
measures are required. In this case please contact the dealer address which is listed in
the chapter Publisher (page 12).

7.2.3.5 Password protection (Password query)

If the password protection of the LEIBINGER JET2neo is activated a password enquiry is
carried out for every start of the device.
Further more the function <Login> respectively <Logout> under the functional area
„Extra" in the main menu is activated. With this function an user can login during the
operation to e.g. carry out functions which are still not enabled and can logout and can
therefore prevent changes of the settings by unauthorized staff.
The message „Password active" is still displayed in the title bar of the menu with a status
display ort he logged in user level.
If the device is switched off during an activated password query, the current password
level will be logged-out automatically. By switching on the device, the LEIBINGER
JET2neo s always in the logged-out status.
Release R1.12 en
Data entry/Programming Group 7
JET2 neo