O3: Copy Function - YASKAWA HV600 Technical Reference

■
o2-24: LED Light Function Selection
No.
Name
(Hex.)
o2-24 LED Light Function
Selection
(11FE)
Note:
When you use A1-03 [Initialize Parameters] to initialize the drive, the drive will not reset this parameter.
0 : Enable Status Ring & Keypad LED
1 : LED Status Ring Disable
2 : Keypad LED Light Disable
■
o2-27: bCE Detection Selection
No.
Name
(Hex.)
o2-27 bCE Detection Selection
(1565)
0 : Ramp to Stop
1 : Coast to Stop
2 : Fast Stop (Use C1-09)
3 : Alarm Only
4 : No Alarm Display
◆

o3: Copy Function

o3 parameters set the operation of the parameter backup function.
■
o3-01: Copy Keypad Function Selection
No.
Name
(Hex.)
o3-01 Copy Keypad Function
Selection
(0515)
0 : Copy Select
1 : Backup (drive → keypad)
The parameter setting values are read from the drive and saved in the keypad.
2 : Restore (keypad → drive)
Copies the parameter setting values saved in the keypad to a different drive.
3 : Verify (check for mismatch)
Makes sure that the parameter setting values in the drive agree with the parameters saved in the keypad.
4 : Erase (backup data of keypad)
Deletes the parameter setting values saved in the keypad.
■
o3-02: Copy Allowed Selection
No.
Name
(Hex.)
o3-02 Copy Allowed Selection
(0516)
Note:
When you select [Parameter Backup] on the keypad menu screen to do the backup function, the drive automatically sets o3-02 = 1.
0 : Disabled
YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference
Sets the function to show the LED status rings and keypad LED lamps.
Sets drive operation if the Bluetooth device is disconnected when you operate the drive in Bluetooth
Mode.
Sets the function that saves and copies drive parameters to a different drive with the keypad.
Sets the copy function when o3-01 = 1 [Copy Keypad Function Selection = Backup (drive →
keypad)].
5.10 o: Keypad-Related Settings
Description
Description
Description
Description
Default
(Range)
0
(0 - 2)
Default
(Range)
3
(0 - 4)
Default
(Range)
0
(0 - 4)
5
Default
(Range)
0
(0, 1)
365