YASKAWA HV600 Technical Reference page 255

■
F6-08: Comm Parameter Reset @Initialize
No.
Name
(Hex.)
F6-08 Comm Parameter Reset
@Initialize
(036A)
0 : No Reset - Parameters Retained
1 : Reset Back to Factory Default
Note:
When you use A1-03 to initialize the drive, this setting will not change.
■
F6-14: BUS Error Auto Reset
No.
Name
(Hex.)
F6-14 BUS Error Auto Reset
(03BB)
0 : Disabled
1 : Enabled
■
F6-15: Comm. Option Parameters Reload
No.
Name
(Hex.)
F6-15 Comm. Option Parameters
Reload
(0B5B)
Note:
• Set F6-15 = 0, 1 to reload F6-xx, F7-xx.
• Set F6-15 = 0, 1 to reset the display on the keypad to 0.
0 : Reload at Next Power Cycle
Restart the drive to update parameters.
1 : Reload Now
The changed parameters are updated without restarting the drive.
2 : Cancel Reload Request
Cancels CyPo [Cycle Power to Accept Changes].
■
F7-01: IP Address 1
No.
Name
(Hex.)
F7-01 IP Address 1
(03E5)
Note:
When F7-13 = 0 [Address Mode at Startup = Static]:
• Use parameters F7-01 to F7-04 [IP Address 4] to set the IP Address. Be sure to set a different IP address for each drive on the network.
• Also set parameters F7-01 to F7-12.
■
F7-02: IP Address 2
No.
Name
(Hex.)
F7-02 IP Address 2
(03E6)
YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference
Sets the function to initialize F6-xx and F7-xx parameters when the drive is initialized with A1-03
[Initialize Parameters].
Sets the automatic reset function for bUS [Option Communication Errors].
Sets the update method when you change F6-xx, F7-xx [Communication Options].
Sets the first octet of the IP Address for the device that is connecting to the network. Restart the drive
after you change this parameter.
Sets the second octet of the IP Address for the device that is connecting to the network. Restart the
drive after you change this parameter.
Description
Description
Description
Description
Description
5.6 F: Options
Default
(Range)
0
(0, 1)
Default
(Range)
0
(0, 1)
Default
(Range)
0
(0 - 2)
Default
5
(Range)
192
(0 - 255)
Default
(Range)
168
(0 - 255)
255