YASKAWA HV600 Technical Reference page 579

2.
Align the notches on the fan with the pins on the drive and install the cooling fan in the drive.
A - Notch on fan
B - Alignment pins on drive
3.
Put the cables and connectors in the recess of the drive.
A - Front of drive
Make sure that the cable and connector are in the correct space.
*1
4.
Hold the fan finger guard at an angle and put the connector tabs on the fan finger guard into the holes on the
drive.
A - Front of drive
B - Drive holes
YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference
Figure 8.42 Install the Cooling Fans
Figure 8.43 Put the Cables and Connectors in the Drive Recess
Figure 8.44 Install the Fan Finger Guard
8.4 Replace Drive Cooling Fans and Circulation Fans
C - Front of drive
B - Recess for cable and connector
C - Tabs
*1
579
8