YASKAWA HV600 Technical Reference page 563

A - Notch on fan
B - Alignment pin on drive
Figure 8.5 Install the Cooling Fan (Drive Models: 2024, 2031, 4021 to 4034)
3.
Put the cable and connector in the recess of the drive.
A - Front of drive
Make sure that the cable and connector are in the correct space.
*1
4.
Hold the fan finger guard at an angle and put the connector tabs on the fan finger guard into the holes on the
drive.
A - Front of drive
B - Drive holes
YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference
8.4 Replace Drive Cooling Fans and Circulation Fans
C - Front of drive
B - Recess for cable and connector
Figure 8.6 Put the Cable in the Drive Recess
C - Tabs
Figure 8.7 Install the Fan Finger Guard
*1
563
8