Set Monitor Items To Show As A Trend Plot - YASKAWA HV600 Technical Reference

4.4 Keypad Operation
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not on
2.
Push (Menu).
3.
Push or
4.
Push or
It will be displayed as follows.
◆

Set Monitor Items to Show as a Trend Plot

You must set the items in this figure to display as a trend plot.
A - Monitor Parameter 1 (set with [Custom Monitor 1])
B - Monitor Parameter 2 (set with [Custom Monitor 2])
C - Trend Plot 2 Scale Maximum/Minimum Value
138
, push (Back) to show [Home] on
to select [Monitors], then push
to select [Analog Gauge], then push
.
.
.
D - Trend Plot Time Scale
E - Trend Plot 1 Scale Maximum/Minimum Value
YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference