YASKAWA HV600 Technical Reference page 278

5.7 H: Terminal Functions
■
H2-09: Modbus Register 2 Address Select
No.
Name
(Hex.)
H2-09 Modbus Register 2 Address
Select
(0B3C)
Sets H2-09 with the address of the register that is output to Modbus Reg 2 Status Satisfied [H2-01 to H2-03 = 63] and
uses the bit in H2-10 [Modbus Register 2 Bit Select].
■
H2-10: Modbus Register 2 Bit Select
No.
Name
(Hex.)
H2-10 Modbus Register 2 Bit
Select
(0B3D)
Sets the bit of the register that is output to Modbus Reg 2 Status Satisfied [H2-01 to H2-03 = 63] and uses the address
in H2-09.
■
H2-40: Mbus Reg 15E0h bit0 Output Func
No.
Name
(Hex.)
H2-40 Mbus Reg 15E0h bit0
Output Func
(0B58)
■
H2-41: Mbus Reg 15E0h bit1 Output Func
No.
Name
(Hex.)
H2-41 Mbus Reg 15E0h bit1
Output Func
(0B59)
■
H2-42: Mbus Reg 15E0h bit2 Output Func
No.
Name
(Hex.)
H2-42 Mbus Reg 15E0h bit2
Output Func
(0B5A)
■
H2-60: Term M1-M2 Secondary Function
No.
Name
(Hex.)
H2-60 Term M1-M2 Secondary
Function
(1B46)
Expert
■
H2-61: Terminal M1-M2 Logical Operation
No.
Name
(Hex.)
H2-61 Terminal M1-M2 Logical
Operation
(1B47)
Expert
Note:
Refer to Output of Logical Operation Results of MFDO on page 275
logical operations.
278
Sets the address of the MEMOBUS/Modbus register output to the MFDO terminal.
Sets the bit of the MEMOBUS/Modbus register output to the MFDO terminal.
Sets the MFDO for bit 0 of MEMOBUS register 15E0 (Hex.).
Sets the MFDO for bit 1 of MEMOBUS register 15E0 (Hex.).
Sets the MFDO for bit 2 of MEMOBUS register 15E0 (Hex.).
Sets the second function for terminal M1-M2. Outputs the logical calculation results of the terminals
assigned to functions by H2-01 [Term M1-M2 Function Selection].
Sets the logical operation for the functions set in H2-01 [Term M1-M2 Function Selection] and H2-
60 [Term M1-M2 Secondary Function].
Description
Description
Description
Description
Description
Description
Description
for more information about the relation between parameter settings and
YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference
Default
(Range)
0001
(0001 - 1FFF)
Default
(Range)
0000
(0000 - FFFF)
Default
(Range)
F
(0 - 1FF)
Default
(Range)
F
(0 - 1FF)
Default
(Range)
F
(0 - 1FF)
Default
(Range)
F
(0 - FF)
Default
(Range)
0
(0 - 8)