Show Monitor Items As A Trend Plot - YASKAWA HV600 Technical Reference

4.4 Keypad Operation
6.
Push or
• Push (Default) to set the parameters to the factory default.
• Push (Min/Max) to move between the minimum value and maximum value.
7.
Push to keep the changes.
The configuration procedure is complete.
◆

Show Monitor Items as a Trend Plot

The procedure in this section shows how to show the selected monitor data as a trend plot.
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
2.
Push (Menu).
3.
Push or
4.
Push or
The screen will show the monitors as shown in this figure.
142
to select the specified digit, then push
, push (Back) to show [Home] on
to select [Monitors], then push
to select [Trend Plot], then push
or to select the correct number.
.
.
.
YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference