YASKAWA HV600 Technical Reference page 569

Remove the drive cover before you start this procedure.
CAUTION! Crush Hazard. Loosen the cover screws. Do not fully remove them. If you fully remove the cover screws, the terminal
cover can fall and cause moderate injury.
1.
Remove the cable from the hooks.
A - Circulation fan
B - Hooks
2.
Disconnect the power supply connector.
YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference
8.4 Replace Drive Cooling Fans and Circulation Fans
Figure 8.20 Remove the Cable
Figure 8.21 Disconnect the Power Supply Connector
C - Fan cable
8
569