YASKAWA HV600 Technical Reference page 582

8.4 Replace Drive Cooling Fans and Circulation Fans
3.
Put the cables and connectors in the recess of the drive.
A - Front of drive
*1 Make sure that the cable and connector are in the correct space.
4.
Hold the fan finger guard at an angle and put the connector tabs on the fan finger guard into the receiving
areas on the drive.
Note:
When you install the cooling fan, make sure that you do not pinch cables between the fan finger guard and the drive.
A - Front of drive
B - Receiving area
582
Figure 8.50 Put the Cables and Connectors in the Drive Recess
Figure 8.51 Install the Fan Finger Guard
B - Recess for the cable and connector
C - Tab
YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference
*1