2.
Pull the cooling fan straight up from the drive. Remove the protective tube on the power supply connector and
disconnect the connector to remove the fan from the drive.
A - Cooling fan
■
Install a Cooling Fan
Reverse the removal procedure to install a cooling fan.
1.
Connect the drive and the fan connectors, and attach the protective tube.
A - Protective tube
2.
Align the notch on the fan with the pin on the drive and install the cooling fan in the drive.
A - Notch on fan
B - Alignment pin on drive
YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference
8.4 Replace Drive Cooling Fans and Circulation Fans
B - Protective tube
Figure 8.14 Remove the Cooling Fans
Figure 8.15 Connect the Power Supply Connector
C - Front of drive
Figure 8.16 Install the Cooling Fan
8
567