YASKAWA HV600 Technical Reference page 353

Default (o1-82 = 0)
Note:
• When o1-80 = 0 [OFF], drive Faults, oFAxx, or CPFs do not trigger a full-screen message to display.
• When o1-81= 0 [Alarm Screen Display = OFF], drive Alarms do not trigger a full-screen message to display.
• When o1-82 = 0 [Message Screen Display = OFF], drive Messages do not trigger a full-screen message to display. The keypad will
continue to show limit errors and other informative screens.
• You cannot select the display method of oPExx [Parameter Setting Errors]. The keypad shows oPExx errors as full screen displays and
status monitor displays. Active oPExx errors have display priority over active faults and alarms.
Status Monitor Display
When o1-40 = 0 [Home Screen Display Selection = Custom Monitor], the keypad will show the Status Monitor on
the second and third lines of the HOME screen.
• The second line shows HOA status and other information, for example:
– Fault/Alarm/oPExx/oFAxx codes
– Information Text status
• The third line shows information texts, for example:
– Pre-Charge messages
– Sleep messages
It will also show Information Text for Sequence Timer status.
Table 5.49 shows the examples of Status Monitor display during normal operation.
Custom Monitors Setting
(o1-24 to o1-35)
More than one monitor set
Only one monitor set
No monitor set
YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference
Table 5.48 Example of Message Displays for Pre-Charge
Table 5.49 Normal Operation Display
Display with No Message
5.10 o: Keypad-Related Settings
Full Screen Message (o1-82 = 1)
Display with Message
5
353