Overview
1.
This hardware design guide is intended to provide recommended design practices for use of the
Renesas industrial Ethernet module solution. Readers of this document are assumed to have general
knowledge in the areas of electrical engineering, logic circuits, and microcontrollers.
1.1 Features
•
Support for the PROFINET
•
Ethernet ports supporting rates of 10 Mbit/s and 100 Mbit/s with auto negotiation
•
Device configuration via a Management Tool and API through the application controller
•
Comprehensive tool support and application examples in source code for the Renesas
TM
Synergy
SK-S7G2
Applications
1.1.1
Industrial automation, remote I/O, etc.
Functions
1.2
•
Complete dual Ethernet interface based on IEEE 802.3, including transformers and PHY
layers
•
Embedded dual-port Ethernet switch for bus and ring network topologies
•
High speed SPI interface and power pins to connect the R-IN32M3 Module to a host CPU
•
Integrated processor to handle real-time industrial Ethernet protocols
R19UH0111ED0100 Rev.1.00
June 30, 2020
®
®
RT and EtherNet/IP
real-time communications standards
Page 9 of 41